What did you do to your GMT today?

[ErikSS]

Mr. Barton. They're picking on your oil pan skid!!! hahahaha

[HARDTRAILZ]

I washed mine...























Well it rained, close enough.

[RyansTBLS]

In which case I washed my truck too!

[Cable810]

Washed mine too lastnight

[dvanbramer88]

Fixed my broken tailgate hinge and cleaned the interior. Got all the dust and dirt out from TECORE. I sprayed cleaner on my dash and it literally made mud... Alsoo hand cleaned all the windows.



poor-boy bench vise

[jrSS]

Bought the rubber inserts for the cup holders today from ebay. Paid $30 for all 6. Can't find a better deal.

[dvanbramer88]

I hit 268,000 miles going to TECORE. Tonight I hit 269,000 miles. Lot of long highway trips are adding up.

[Cable810]

Drained and cleaned the Rear diff. Found water and dirt in it.....

[boog2006]

P0128...changed thermostat...it sucked...twice

[DirtyBacon04]

I keep getting that code on an irregular basis. I have had parts in hand for months, but lack the effort to replace. Also, not really seeing the immediate need, as my temps are acting normal.

[boog2006]

Yeah I've been fluctuating between top dead center and two clicks left. Figured it was time.

[v7guy]

I've gotten that code in the last couple weeks, temp showed a few clicks to the left for a couple days and then started acting normal again. Kinda strange. It's irritating cause I just replaced it a year ago or so.

[KE7WOX]

Finally had a headlight die on me sometime this week (I'm guessing yesterday, but US-33 has lights so I didn't notice until I got home), replaced both low beam bulbs with Sylvania Ultras.

[Regulator1175]

Today I got most of my truck back together. Thank you Eric for contributing your day to helping me with the re-assembly.

The list of new parts:

Front upper and lower heavy duty control arms
Upper and lower ball joints
SS Rotors (all 4 corners)
Calipers (all 4 corners)
Brake pads (all 4 corners)
Extended brake lines (all 4 corners)
Rear upper and lower adjustable control arms from Massive
SS rear axle with custom U joint
Rear Skyjacker springs
Rear Skyjacker shocks
Alignment set up for tomorrow pending successful assembly of my new brake lines.

My original transmission is now bolted up to my engine stand and I will start my tear down and overhaul on that tomorrow. With any luck I will be able to get it rebuilt and installed in the next few days and ready to wheel next weekend. If not my current Tranny will survive, it just wont be happy with me. The Radflo's are the last part left in the rebuild and I will have an entirely new suspension set-up.

[Trail X]

Heavy duty control arms? Do tell us more about these. I haven't heard of HD versions before.

[Opeth]

Hacked off that hideous anal wart of a resonator.

[HARDTRAILZ]

Took some junk out and dropped it in barn at land for winter storage.

[Sugar16]

Built a light bar this weekend for the top, im still waiting on my switches to come in the mail so this week i will have some better pictures of the finished product, its raining out now so i only have a couple of pictures from when i was building it

[Trail X]

I like the LED lights, but your flat bar leaves a lot of rigidity on the table. I would highly recommend switching to a square tube.

[Sugar16]

I like the LED lights, but your flat bar leaves a lot of rigidity on the table. I would highly recommend switching to a square tube.

Yeah, I found that out this weekend when I drove it, I heard something that sounded like my hatch was not closed all the way. When I went to get the square tubing I was having a hard time finding it but i found the flat bar and I didn't think there would be an issue but that was probably because I was just excited about getting it done.

The LED's are real bright, once I get the switches I will get some pics of them on and off