What did you do to your GMT today?

[dvanbramer88]

In the state of disrepair his truck has been in, I can't believe it even makes it to the mall and back.

[v7guy]

He did just get over a driveshaft issue... maybe a loss of engine power due to the wear from scaling those mad crazy curbs?

kitty_have_teh_powar.jpg (20.66 KiB) Viewed 15501 times

[JCrayton99]

I'm not sure how but I think he managed to break the spring driving from the trailer to the first obstacle. I believe driving skills.

[DustinC1989]

Finally got around to putting the tow hooks on.
Had to use epoxy to reattach the passenger side bracket on the bumper cover, just waiting on the "20 minute epoxy" that had been sitting for 2 hours.... to dry

[Regulator1175]

Finally got around to putting the tow hooks on.
Had to use epoxy to reattach the passenger side bracket, just waiting on the "20 minute epoxy" that had been sitting for 2 hours.... to dry

Ummm, I would not trust 2 part epoxy on tow hooks that may be needed to pull you out of something. That is where the drill and nuts and bolts come into play!

[DustinC1989]

Hooks are factory and BOLTED in the factory location. The plastic bracket for the bumper cover is what I used epoxy on. Guess I should have been more clear on that

I know I'm still some what of a new, but damn lol I'm not that stupid

[DirtyBacon04]

Hooks are factory and BOLTED in the factory location. The plastic bracket for the bumper cover is what I used epoxy on. Guess I should have been more clear on that

I know I'm still some what of a new, but damn lol I'm not that stupid

Bumper cover? We dont need no stinkin' bumper cover!!

[DustinC1989]

I do... Fiancee likes off reading, but won't let me take the bumper covers off.
Once we get her truck, the trailblazer is fair game...

[The Roadie]

I know I'm still some what of a new, but damn lol I'm not that stupid

You have to admit we sometimes attract the "wrong crowd."

[DustinC1989]

True, I would hope people aren't dumb enough to use a 2 part epoxy to hold tow hooks...
But I did read to zombie killer build thread or hunter or whatever the idiots name was, so apparently they do exist

[v7guy]

True, I would hope people aren't dumb enough to use a 2 part epoxy to hold tow hooks...
But I did read to zombie killer build thread or hunter or whatever the idiots name was, so apparently they do exist

yah, we've learned the hard way not to assume much. after you're around awhile and we get a better idea of where you're at we won't be so quick to state the obvious lol

[Blazintrails03]

Got the Curt Front Hitch installed. While doing this I noticed both upper ball joints are trash. Guess ill be flipping the UCA's and putting some new ball joints on soon

[dvanbramer88]

I put a starter in my dad's saturn.... Its a GM.

[DustinC1989]

Started building brackets and running wires, just waiting on antennas and radio now

[darring70]

265/70/17 wheels installed

[navigator]

......Had to use epoxy to reattach the passenger side bracket on the bumper cover, just waiting on the "20 minute epoxy" that had been sitting for 2 hours.... to dry

Mine came off when I was installing my body lift and skids. I might try the 2part epoxy.
For right now, I used a couple of sheet metal screws and screwed the fender liner to the bumper cover to hold it in place

[DustinC1989]

Don't waste your time, tried 3 different ones... Nothing held after driving around the property

[navigator]

thanks, my other thought was to put 4 screws in where the little studs are that hold it in place but then I would have the screw heads on the outside of the bumper cover. Using two screws with the fender liner and putting a little paint on them works pretty well and you don't really notice.

[djthumper]

The only epoxy that would work remotely for that is specific to ABS plastic. It takes a good amount of prep to make things stick and the epoxy is not htat cheap stuff that you by at Home Depot.

[DustinC1989]

MEK+ABS was gonna be my next experiment