Start with a Class III/IV hitch
![Image](https://lh5.googleusercontent.com/-dCEKI5I7me0/UCpM0UeteaI/AAAAAAAABrg/L4oAoJD_yiY/s842/2012-07-28_17-29-57_306.jpg)
Building the sheetmetal, piece by piece.
![Image](https://lh6.googleusercontent.com/-pMIpmM9yTbM/UCpM5bUWmZI/AAAAAAAABro/Tb4Xd_rsuQs/s842/2012-07-29_09-39-44_280.jpg)
![Image](https://lh5.googleusercontent.com/-MRYicjdXk-k/UCpM-mkULhI/AAAAAAAABrw/ePu88GLr8i8/s842/2012-07-29_12-26-39_407.jpg)
Stella came out to help
![Image](https://lh6.googleusercontent.com/-eIp44yEHwPM/UCpNDhLH5oI/AAAAAAAABr4/wjU0p0DvB-0/s596/2012-07-29_16-31-45_278.jpg)
More sheetmetal work
![Image](https://lh5.googleusercontent.com/-6rFowE9ee6Q/UCpNIhygOnI/AAAAAAAABsA/W35mnu_Mrak/s842/2012-07-29_16-58-40_908.jpg)
![Image](https://lh3.googleusercontent.com/-PXAO_UWUw58/UCpNNjA-suI/AAAAAAAABsI/AZ9ujB3dYYQ/s842/2012-07-29_16-58-52_416.jpg)
![Image](https://lh5.googleusercontent.com/-B1b-oaK-qPE/UCpNSnpC8QI/AAAAAAAABsQ/klUDsRrTRcs/s842/2012-07-29_17-02-10_201.jpg)
Tube radius corners put in and most of the S/M welded up
![Image](https://lh3.googleusercontent.com/-XWN_XbL3xMs/UCpNX-YrT4I/AAAAAAAABsY/WQLAie_6UW8/s842/2012-08-11_10-06-44_682.jpg)
![Image](https://lh4.googleusercontent.com/-osUCWmpWvP0/UCpNcwoAo5I/AAAAAAAABsg/gnTGw0v_XM0/s842/2012-08-11_10-06-53_931.jpg)
The cut position for Ben's SAS axle placement
![Image](https://lh3.googleusercontent.com/-sjws7KXV5Ak/UCpNnMfs1mI/AAAAAAAABsw/mgr4Z7nRWQI/s842/2012-08-11_14-00-18_283.jpg)
Swing started
![Image](https://lh4.googleusercontent.com/-Qhi0EafuYt4/UCpNsX62c7I/AAAAAAAABs4/jYYmOs7gsZI/s842/2012-08-11_16-53-43_537.jpg)
Latch setup
![Image](https://lh3.googleusercontent.com/-fbYSNQivMBg/UCpNxVmt21I/AAAAAAAABtA/2ezIvV3MjQQ/s842/2012-08-11_20-12-54_57.jpg)
![Image](https://lh6.googleusercontent.com/-R5-PEtBqV2M/UCpN2cZUSTI/AAAAAAAABtI/tLE4-oMF82Q/s842/2012-08-12_11-04-14_622.jpg)
![Image](https://lh5.googleusercontent.com/-cEiUupNHDxE/UCpN7R9Pu3I/AAAAAAAABtQ/txrO_plgJRY/s842/2012-08-12_11-04-21_3.jpg)
Back on the TB
![Image](https://lh6.googleusercontent.com/-A66PUqvLd38/UCpOAqZJ-wI/AAAAAAAABtY/Z_MGCWWBCpk/s842/2012-08-12_18-21-01_533.jpg)
Since Ben is going to use a different kind of fuel storage, this particular one isn't going to have a jerry can holder. It's just going to hold the 37" tire and the Hi-Lift. Here's the start of the Hi-Lift mounting.
![Image](https://lh4.googleusercontent.com/-b2GwckLnh7g/UCpOF_b-GFI/AAAAAAAABtg/37oWTGnW-K8/s842/2012-08-12_19-11-33_863.jpg)