by v7guy » Sat Feb 02, 2013 3:03 am
I made my previous comments concerning gloves from personal experience. I had a classmate in high school motivate a drillpress to do its best to wrap his hand around the bit. I don't remember anything other than looking over at the loud noise and seeing his gloved hand wrapped around the drill bit in the press. I'll never forget it.
Our gloves fit reasonably well, but the definitely weren't skin tight and close cut, can't say i've worn anything other than my shooting gloves that were close and tight with good feeling and I wouldn't expect them to do anything up against metal working tools. I haven't worn a work glove yet that's worth a shit and I wore various work gloves over two years when I worked construction trying to find a good pair.
I've had the 4.5" grinder kick and try to suck in my support hand that was wearing a welding glove. It jammed the glove between the gaurd and the disk. Left me with a hell of a bruise and blood blister. Would have prefered a cut cause it would have been a glancing blow.
I'm not saying gloves are bad. I'm saying I'm not comfortable wearing them with spinning tools. I also tend to roll up my sleeves and tuck in my shirt and hood strings when applicable. My forearms take a beating sometimes, but it is what it is. Maybe guys have had different experiences, but mine tell me to keep gloves away from spinning tools.
Of further interest, if you don't have a leather apron, or just aren't wearing it at the moment you're cutting, be aware of the direction of the sparks. You'll find yourself on fire if you don't.
Even if you tuck in a t shirt, if the tool goes into your midsection it's going to be an uncomfortable day.
We're really getting off the real intention of this thread.
All things in moderation, including moderation.
Some people never go crazy... what truly horrible lives they must lead