What lift and spacers might these be?

[Malafor]

I've found a 3" lift kit and some spacers for sale here in sweden.
The spacers he says are from MarkMC but he does not remember where he bought the lift kit from.

So I've searched around to try and find similar looking lifts and the closest i can find is one called ReadyLift.
But on there website i can only find 2" ones, These I'm looking to buy look a lot bigger then the ones on ReadyLift's website.

Anyone know what brand they are? And also would be nice if someone could confirm that these are actually MarkMC's spacers as well.

Here's the pictures.

[bartonmd]

Don't use the spacers! Those are outside-struts spacers, that do not limit down-travel to near stock levels, making the upper ball joint the down-limiting component, possibly causing it to break.

Mike

[Malafor]

Don't use the spacers! Those are outside-struts spacers, that do not limit down-travel to near stock levels, making the upper ball joint the down-limiting component, possibly causing it to break.

Mike

Hmm yeah after looking closer at Theliftmeister website these seem to miss that center lip.

Guess I will have to save up a bit more before ordering from Mark myself then, Stupid swedish taxes makes me pay 25% more ontop of the price+shipping.


Thanks for the warning!

[Trail X]

Mike was referring to the front lift blocks. They are often ambiguously referred to as 'spacers'.

The wheel spacers seem ok. The lip that you referred to is only a wheel centric lip that is not a necessity. The lip just helps center the wheel to the hub a little more than the lugs alone do.

Keep in mind that the wheel spacers pictured appear to be wheel adapters. The key is that they change the lug pattern.

[Malafor]

Mike was referring to the front lift blocks. They are often ambiguously referred to as 'spacers'.

The wheel spacers seem ok. The lip that you referred to is only a wheel centric lip that is not a necessity. The lip just helps center the wheel to the hub a little more than the lugs alone do.

Keep in mind that the wheel spacers pictured appear to be wheel adapters. The key is that they change the lug pattern.

Ah, Ok so then the wheel spacers might still be of interest, he wants about 203$ for them which would save me about 126$ if i order from the US.
According to the seller the adapter/wheel spacers are suppose to be from MarkMC.

And yes I'm after adapters because its way to difficult to find our bolt pattern especially in sweden.
Planing on finding some nice 15" rims and putting some 32x11.50's on them.


Thanks for the heads up.

[bartonmd]

Mike was referring to the front lift blocks. They are often ambiguously referred to as 'spacers'.

The wheel spacers seem ok. The lip that you referred to is only a wheel centric lip that is not a necessity. The lip just helps center the wheel to the hub a little more than the lugs alone do.

Keep in mind that the wheel spacers pictured appear to be wheel adapters. The key is that they change the lug pattern.

Correct, I was talking about the strut-top spacers, not the wheel adaptors...

Mike

[Cable810]

Planing on finding some nice 15" rims and putting some 32x11.50's on them.

Let me know what 15" rims you fit on your ride. I'm too looking at gettting 15s for my TB.

[JCrayton99]

Good luck with 15" rims. I have only seen one person successfully put them on our vehicle. Our calipers are too big to fit most, 16" being the smallest to fit without issues.

[The Roadie]

Readylift lifts are only acceptable for 2WD trucks.

[HARDTRAILZ]

Planing on finding some nice 15" rims and putting some 32x11.50's on them.

Let me know what 15" rims you fit on your ride. I'm too looking at gettting 15s for my TB.

I had a couple sets of 15sthe and the info is on here or the os if you search...

I know at least one other person has ran 15s sucessfully.

[Trail X]

Key is just having little backspacing right? Less than 4" or so?

[HARDTRAILZ]

3.75 or less. Aluminum wheels can be thick so may need less than that.

[navigator]

that means they will stick way out right?

[HARDTRAILZ]

There are pics of mine w 15x8s n 35s. It was not really wider than my current setup