by mikekey » Mon Dec 09, 2013 9:44 am
Yes, a matter of fact, I'll post a picture later today.
Originally I saved all 3 of the TRE's in ebay and then forgot to recheck this thread about the Fabtechs. I had Fabtech on the brain from AlekG's post about the dirt logic shocks. Anyhow, I ended up ordering them.
But going back and looking at these compared to the Rareparts, I'd be slightly concerned that the Rareparts TRE's don't adjust enough for our vehicle since they are for the Silverado. I'm not sure if the distance from the inner on the rack and pinion to the outter is longer on the Silverado, but it is an assumption.
For me the outters slid right in place. No need to use a taper like Fishsticks had to in the beginning of this thread. I have a stock inner/outter and the threads on the Fabtech inner match. So hopefully when I get back to round two of trying this I can get the whole damn things on and report.
Based on your build thread on GMT you might just want to save yourself the money and get the regular 2500HD tie rod ends.
Once lifted 03 Trailblazer on 35's, gave it up to travel the USA with my family.