These are the 78" version of these: http://www.trail-gear.com/rock-sliders . I shortened them to 76" by chopping an inch out of each end. It's snug, but they fit with 33's with my wheels. If you have wheels spaced farther out (with spacers etc) or larger tires you may need to cut more off. I apologize for some of these photos being really lousy, I was having some obvious camera issues....
Here you see their stock length:
Chop off the end, chop off another inch:
Weld the end back on:
After cutting the legs all to the correct length (individually fitting them), tack them into place with the slider in position. I used 1/2" tubes to space the main bar from the rocker panel when tacking:
Welding it all together and painting:
Naturally this required some trimming of the trim panel but it keeps them tucked up nicely:
Some construction shots:
Very little deflection while holding up one sided of the vehicle:
This non-slip tape from Home Depot works great: