2010 MDB Bumper / Rad Skid / Oil Pan Skid GB
Moderator: bartonmd
Forum rules
All posts in this section pertain to our vendor:
72 posts
• Page 4 of 4 • 1, 2, 3, 4
In the first posting, dated Mon Aug 30, 2010, there is a block that says "GB is over, Current prices are...". I looked around, but haven't found yet, any prices for 2011. Can you point me to where I might have missed that list? Is there a current master-price list elsewhere?
"It is better to have and not need, than to need and have not."
-
Skidder - Member
- Posts: 95
- Joined: Mon Oct 24, 2011 9:44 pm
- Location: North Central Tx
- Name: Greg
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
Skidder wrote:In the first posting, dated Mon Aug 30, 2010, there is a block that says "GB is over, Current prices are...". I looked around, but haven't found yet, any prices for 2011. Can you point me to where I might have missed that list? Is there a current master-price list elsewhere?
The prices in the first post are current... The post is from 30AUG2010, but I edited the post and prices much later...
Thanks,
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Kyle got a couple more tubes on his bumper, when he came over this weekend to help me with the 2" body lift bumper...
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Looking good.
Build Thread
Back to stock, had fun while it lasted...
Back to stock, had fun while it lasted...
- janesy86
- Veteran
- Posts: 1291
- Joined: Thu Sep 10, 2009 2:29 pm
- Location: MA, Salem
- Name: Nick Janes
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Thanks! We were concerned about how it would turn out, because his is more narrow in the center, and farther out than others have been, but it really worked out well!
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Turned out great and flows really well w the truck.
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
Yeah, I'm not ashamed to say that we stood there for like 15 minutes saying "damn, that turned out good!"
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Just an FYI, not going to break the bank or anything, but base bumper prices are going up $25 the second week of January... Higher costs, and all that... Plus, when I started making (and pricing) these, I was using work's wire/gas/grinders/shear...
Thanks,
Mike
Thanks,
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Still a hell of a deal for custom bumpers!
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
-
OregTrailBlazin - Off-Road Vendor
- Posts: 610
- Joined: Wed Sep 09, 2009 2:34 pm
- Location: OR, Grants Pass
- Name: Johnathan Kurz
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
Hey there, I just hit a deer with my 05 GMC Envoy and the insurance company is going to cut me a check to get the bumper fixed. I don't want that cheap piece of plastic back on there so how can I order one of your bumpers? 
- Blake
- Newbie
- Posts: 1
- Joined: Mon Jan 25, 2016 2:35 pm
- Name: Blake Werner
- Vehicle Year: 2005
- Vehicle: GMC Envoy XUV
- DriveTrain: 2WD w/ Limited Slip
Shoot me a PM, but I don't do Envoy bumper kits, yet. I'm hoping to start, this spring/summer, but it hasn't happen yet.
The radiator skid and oil pan skid do work on the Envoy, though.
Mike
The radiator skid and oil pan skid do work on the Envoy, though.
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
72 posts
• Page 4 of 4 • 1, 2, 3, 4