Thanks, guys! I really am happy with the way it turned out!
Mike
MDB Steel Bumpers...
Moderator: bartonmd
Forum rules
All posts in this section pertain to our vendor:
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
- DJones
- Trail-Blazer
- Posts: 267
- Joined: Tue Apr 27, 2010 4:27 pm
- Location: IN, Angola
- Name: David
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
Damn Mike! That is sharp! What would you charge to bend the pipe and ship for a non-BL bumper?
Mario - Build Thread
-
Gordinho80 - Lifer
- Posts: 2787
- Joined: Tue Sep 08, 2009 9:27 am
- Location: NJ, Jackson
- Name: Mario Almeida
- Vehicle Year: Other
- Vehicle: Other Vehicle
- DriveTrain: 4WD
Gordinho80 wrote:Damn Mike! That is sharp! What would you charge to bend the pipe and ship for a non-BL bumper?
Just to bend the tube (1.75x.120 HREW), ends left long for you to cut and weld on, $120 + actual shipping (probably $25)...
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Looks sharp, nice to see you expanding your offerings, may not have to have a grill guard shipped to you for the next one. 
Speaking of such. DTC bashed my crossbar for my fuel tank, there in bashing the fuel tank... Everything still works, and as soon as I can get my wife out of it, i'll remove the bar and see if the tank warms up and reforms.
But I'm betting you can guess one of the things I'll be needing next.
Speaking of such. DTC bashed my crossbar for my fuel tank, there in bashing the fuel tank... Everything still works, and as soon as I can get my wife out of it, i'll remove the bar and see if the tank warms up and reforms.
But I'm betting you can guess one of the things I'll be needing next.
- Diacom
- Addict
- Posts: 882
- Joined: Fri Jul 23, 2010 9:08 pm
- Location: NV, Yerington
- Name: Noel
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
janesy86 wrote:On to the pics!! Lovin' it! Still got to thank Mike for his products!
Can't wait to paint it so it looks new again...
Hey...that looks outstanding! Great job with it! I'm very jealous.
-
SaltWaterDrinker - Trail-Blazer
- Posts: 465
- Joined: Wed Jul 06, 2011 9:07 pm
- Location: PA, Philadelphia
- Name: Josh
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
i am interested in getting one made like hardtrailz has on page 18 could you pm me a quote with and without winch mount if possible and a price on the one above on the maroon tb. shipped to belen nm 87002 residence or clovis nm 88101 business whichever would be cheaper
- yalchga
- Member
- Posts: 88
- Joined: Mon Aug 29, 2011 12:23 pm
- Location: NM, ALbuquerque
- Name: Gabe
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
Would the bumper with the body lift work with a 2" body lift?
- Me007gold
- Off-Roader
- Posts: 142
- Joined: Fri Aug 13, 2010 5:53 pm
- Location: TX, San Antonio
- Name: Michael
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
Me007gold wrote:Would the bumper with the body lift work with a 2" body lift?
I can do a 2" body lift bumper...
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
bartonmd wrote:Me007gold wrote:Would the bumper with the body lift work with a 2" body lift?
I can do a 2" body lift bumper...
Mike
Good to know. That's the next thing on my list
- Me007gold
- Off-Roader
- Posts: 142
- Joined: Fri Aug 13, 2010 5:53 pm
- Location: TX, San Antonio
- Name: Michael
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
I like...
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
Me too. Has great lines.
Build Thread
Back to stock, had fun while it lasted...
Back to stock, had fun while it lasted...
- janesy86
- Veteran
- Posts: 1291
- Joined: Thu Sep 10, 2009 2:29 pm
- Location: MA, Salem
- Name: Nick Janes
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
also freshly powdercoated!
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
What is a hitch winch mount going to run cost wise
- Nakashige
- Vendor
- Posts: 832
- Joined: Sat May 21, 2011 12:00 pm
- Location: MA, Worcester
- Name: Ben Caesar
- Vehicle Year: 2003
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
Like a 2" receiver mount? I don't know... $80...$100 if you want it powdercoated...
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
How much is one of these bumpers but made for a winch and also with the tree benders on it? Cost including shipping to 21144 MD
- MD_trailblazer
- Cruiser
- Posts: 24
- Joined: Sat Feb 18, 2012 3:39 am
- Location: Severn, md
- Name: Michael
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
PM him the information and he will get back with you
-
djthumper - Moderator
- Posts: 2702
- Joined: Wed Mar 24, 2010 6:04 pm
- Location: NV, Las Vegas
- Name: Larry
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
Yes, PM me, but looking at this thread in this section will give you an idea:
MDB Fabrication Bumper/Skid Options and Cost
viewtopic.php?f=35&t=2883
MDB Fabrication Bumper/Skid Options and Cost
viewtopic.php?f=35&t=2883
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
I just got a 10 min lecture about how awesome your bumper is from the guy installing my stereo... The lines are perfect, the welds are immaculate, this guy really knew what he was doing, blah blah blah blah blah blah. 
Current Count of Transmission Rebuilds: 5.5
***The more you know, the less you need.***
USMC '07-'12
Dirty Bacon's Build
-
DirtyBacon04 - Moderator
- Posts: 3046
- Joined: Fri Aug 05, 2011 4:59 am
- Location: FL, Central
- Name: Michael
- Vehicle Year: 2004
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Expedition Rated
DirtyBacon04 wrote:I just got a 10 min lecture about how awesome your bumper is from the guy installing my stereo... The lines are perfect, the welds are immaculate, this guy really knew what he was doing, blah blah blah blah blah blah.
Haha, that's awesome!
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated