Hello Everybody,
I am new to the site, have been reading though for months.
I am working on my 03 TB non EXT. I am planning on the following lift and parts and looking for feedback on past experiences. The intentions of the vehicle is daily driver/toad/off road. We don't go extreme off road but places that require clearance and 4WD including soft sand, creek crossings, and mud at times.
Front:
Bilstein 5100 struts - max lift setting
45H2164 springs (EXT 4x4)
MOOG CK80826 upper control arms with additional 2 degrees of camber
Swap/flip upper control arms.
Rear:
G80 complete diff from EXT
07 Z71 springs
Bilstein 5100 struts
I just finished welding and sandblasting the MDB front bumper, rad skid and oil skid. This is why I am going with the spring replacement. I have been looking at the UCS swap/flip thread and looks like the adjustable camper control arms may be a good thing. Also I want new ball joints and bushings, cost/time wise I am better off just replacing the entire arm. I still have to look into the wheel spacer thing as tires are going to be needed soon.
Any feedback is appreciated.