06denaliman’s mild build

[06denaliman]

Nothing to exciting but gave her a good wash. Threw some tire shine on and cleaned all the windows. Not bad for 13 yrs old its still a 10 footer but its my 10 footer lol




Sent from my iPhone using Tapatalk

[06denaliman]

Changed plugs last night. Few of em were not the same plugs. 5 of them were one part number and other 3 were different. Also plug on front pass side was a pita. Also doing front one on drivers side i unplugged coolant temp sensor and the connector just fell apart so i got a new pigtail today and am wiring it in. Hard to believe that plug not being right has temp gauge not working, check gauges light on, and its extremely hard to start. Hope to have it fixed as soon as wife gets home so she can watch the kiddos for a little bit.


Sent from my iPhone using Tapatalk

[06denaliman]

Wired in new connector for coolant sensor and its back to normal. So glad it was that simple. Now just need to do the hubs and then its on to my headlights and lift.


Sent from my iPhone using Tapatalk

[06denaliman]

Representing maryland with what i had done at work today.



Its matte black and on both driver and pass sides.


Sent from my iPhone using Tapatalk

[06denaliman]

Did this with peelable spray. Works ok see how long it last till i get my other headlights done.



There really not that dark wish i woulda gone lil darker


Sent from my iPhone using Tapatalk

[06denaliman]

Re did my spare set of taillights little darker. Also swapped in led brake and parking bulbs. Also swapped my license plate bulbs to leds too. Next up is interior lights to leds. I already have brake, parking, reverse bulbs done and plate lights. I also have led low beam headlight bulbs too.




Sent from my iPhone using Tapatalk

[06denaliman]

Nothing really new except i swapped my headlights out with the fresh ones I had intended to customize because that peelable tint does not hold up to much abuse. I also swapped my taillights back to my slightly smoked ones. The other ones are way to dark. They looked good but i dont want to get rearended.


Sent from my iPhone using Tapatalk

[06denaliman]

Put on my avs vent shades. Been putting them off for a year and finally ordered em and got them installed today. Not a huge fan of the stick on ones but didnt want to spend a ton on in channel ones


Sent from my iPhone using Tapatalk

[06denaliman]

Finally decided to wash it. Nothin new except changed trans fluid but did not drop pan and change filter. 150k never been changed i just decided to take my chances and just chamge fluid and not mess with filter. Shifts way better now.

Sent from my iPhone using Tapatalk

[06denaliman]

This past week i decided to clay bar and wax a panel at a time finished it all up Thursday. Did it while in lunch at work all week. Also put a coat of spray wax on whole thing today. Results i am very impressed with being 13 yrs old except front bumper since deer incident.



And look at the shine and reflection on hood




Sent from my iPhone using Tapatalk

[06denaliman]

Gave her another wipe down and used ultimate quik wax. Trying to use my products up so i can restock with new ones.








Sent from my iPhone using Tapatalk

[06denaliman]

Been a while since posting but yesterday i had my borla muffler removed and a piece of pipe put in place. Its sounds good and is not much louder in cabin then the borla proxs muffler. So happy i had it done and wouldnt go back. And cold start is amazing. This is the way a v8 should sound. Ill try and get a video up soon.


Sent from my iPhone using Tapatalk

[06denaliman]

Plasti dipped wheels. May wind up painting or powdercoat them come spring. Gonna be ordering front suspension stuff soon to hoard till spring when it warms up and can put on. Same time ill get a lift and install it as well.




Sent from my iPhone using Tapatalk