Track bar
6 posts
• Page 1 of 1
I'm thinking about installing the BDS 2" lift kit. I was wondering if I need to replace the track bar with an adjustable one to keep the rear end centered?
- skooge
- Newbie
- Posts: 3
- Joined: Mon Feb 13, 2017 9:16 pm
- Name: Steven
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
The actual answer to that is the panhard bar lowering bracket from ErikSS, which levels your panhard bar back out. If you do an adjustable one, you can get it centered up at the new ride height, but it won't be right through the RoM, as the stock length is still what it needs everywhere else.
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Okay, thanks! Where might I find one of these lowering brackets?
- skooge
- Newbie
- Posts: 3
- Joined: Mon Feb 13, 2017 9:16 pm
- Name: Steven
- Vehicle Year: 2005
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
PM ErikSS.
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
2008 TB Radflo coil overs, Z71 rear springs, 2" spacer, skyjacker N8030 shocks, LT285/75R16E Goodyear MTR
My Build ----- MY Youtube Channel
My Build ----- MY Youtube Channel
-
TBYODA - Moderator
- Posts: 1762
- Joined: Mon Apr 01, 2013 9:07 pm
- Location: NY, Rochester
- Name: Robert Sengillo
- Vehicle Year: 2008
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Limited Slip
- Rank: Offroad Rated
Yeah, or that...
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
6 posts
• Page 1 of 1