I bought some napa front springs seeking out V8 ext springs. I found Napa has a few different ones available.
Height wise they have the same load height, but there is a major difference in load design. I see the coil type with square end and Tangential end, whatever that means. Im guessing its in LBS
Has anyone used these? I bought the Napa 2773484 hoping more weight means less compression and will add some ground clearance. Im waiting on getting my spacers for the fronts before doing this as I dont want to do the work 2 times. If i get OE 88 springs I will just return the Napa ones.
#2773484:
Coil Spring Free Height : 16.74"
Coil Spring I.D. : 3.7"
Coil Spring Load Height : 10.5"
Coil Spring Type : 1 Square End, 1 Pigtail End
Design Load : 2340
Spring Rate : 375
Wire Diameter : .67"
#2773488
Coil Spring Free Height : 15.67"
Coil Spring I.D. : 3.7"
Coil Spring Load Height : 10.5"
Coil Spring Type : 1 Tangential End; 1 Pigtail End
Design Load : 1940
Spring Rate : 375
Wire Diameter : .67"