Receiver-Mounted Tire/Fuel/Jack Swing-Out.
71 posts
• Page 4 of 4 • 1, 2, 3, 4
What more you going to add to the bumper
The FIRST Solid Axle Swapped Trailblazer in Presque Isle County MI
My Build
My Build
The Roadie wrote:Research, plan your mods, fund the plan, then GO DO THEM. THEN WHEEL IT.
-
Cable810 - Veteran
- Posts: 1989
- Joined: Thu Feb 09, 2012 6:43 pm
- Location: MI, Rogers City
- Name: Caleb
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Offroad Rated
Cable810 wrote:What more you going to add to the bumper
What bumper? It's a tire carrier
Chevy Power!
Long live the Republic
"Violence is not always evil. The judicious use of violence and those willing to use it without hesitation is often all that stands between wolves and sheep."
Build Thread
Long live the Republic
"Violence is not always evil. The judicious use of violence and those willing to use it without hesitation is often all that stands between wolves and sheep."
Build Thread
-
dvanbramer88 - Lifer
- Posts: 2283
- Joined: Tue Jul 05, 2011 3:12 pm
- Location: PA, Bristol
- Name: Dave
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Trail Ready
Wow I'm awake..... He knows what I mean!
The FIRST Solid Axle Swapped Trailblazer in Presque Isle County MI
My Build
My Build
The Roadie wrote:Research, plan your mods, fund the plan, then GO DO THEM. THEN WHEEL IT.
-
Cable810 - Veteran
- Posts: 1989
- Joined: Thu Feb 09, 2012 6:43 pm
- Location: MI, Rogers City
- Name: Caleb
- Vehicle Year: 2002
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Offroad Rated
I think that's just about it. I started to do a wood table, but couldn't see carrying the weight.
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
I dig it!
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
That looks great!
-
djthumper - Moderator
- Posts: 2702
- Joined: Wed Mar 24, 2010 6:04 pm
- Location: NV, Las Vegas
- Name: Larry
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD
- Rank: Offroad Rated
Thanks! I do need to put a block in the middle for the middle of the rack to rest on, though, so I won't have to worry about where I put the stove, etc. The front is pretty strong, but there's no real support in the middle in the back. I'll come up with something.
Mike
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
What I came up with:
At TECORE:
At TECORE:
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
After some consideration, I think I'm OK with selling this one... I'm too busy this year to wheel it anywhere far away (where I'd need it), and the wife is driving the TB more this winter. Plus, IF all goes as planned, when she starts "growing" she'll be driving the TB more instead of the Cruze, and she's not into dealing with opening the thing when she gets into the rear hatch. So, it's either it sits in the garage until I need it, or I can sell it now and bet on not needing another one until I can build myself a rear bumper.
Because I'm not taking orders for these for probably close to a year (plus lead time after that), and because it's a much better solution than the HG that goes for over $1k with the options to carry everything that this carries, this one is up for sale for $1100 plus shipping, including the cable lock and the table setup. It is powdercoated black with a clear powdercoat over the black. It has small scrapes at the bottom of the legs that tie to the frame, but you'll do the same to it, and I'll hit the little sections with some touch-up paint. It's designed for a 33" tire, and I've got over 1" from the sidewall of my 245s to the rectangle tubes, so it should take a 285mm wide tire with no problem, as long as your backset isn't something crazy. It's set up for the stock bolt pattern right now, but it's just cutting the tack welds on those bolts and tacking them in the other set of holes away from being set up for a 6x5.5 1/2 ton truck pattern. I'll do that for nothing, if needed.
It can ship out and get wherever in the CONUS well before TECORE, a week or so after I get paid for it. Shipping east of the Mississippi is $140 and $165 anywhere else.
More specifics, send me a PM.
Thanks,
Mike
Because I'm not taking orders for these for probably close to a year (plus lead time after that), and because it's a much better solution than the HG that goes for over $1k with the options to carry everything that this carries, this one is up for sale for $1100 plus shipping, including the cable lock and the table setup. It is powdercoated black with a clear powdercoat over the black. It has small scrapes at the bottom of the legs that tie to the frame, but you'll do the same to it, and I'll hit the little sections with some touch-up paint. It's designed for a 33" tire, and I've got over 1" from the sidewall of my 245s to the rectangle tubes, so it should take a 285mm wide tire with no problem, as long as your backset isn't something crazy. It's set up for the stock bolt pattern right now, but it's just cutting the tack welds on those bolts and tacking them in the other set of holes away from being set up for a 6x5.5 1/2 ton truck pattern. I'll do that for nothing, if needed.
It can ship out and get wherever in the CONUS well before TECORE, a week or so after I get paid for it. Shipping east of the Mississippi is $140 and $165 anywhere else.
More specifics, send me a PM.
Thanks,
Mike
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
Great set-up. Be an asset to whoever is lucky enough to snag this.
We all know the quality of everything Mike builds!
We all know the quality of everything Mike builds!
they've always worked for me.
-
HARDTRAILZ - Moderator
- Posts: 6342
- Joined: Sat Sep 12, 2009 1:49 am
- Location: IN, Batesville
- Name: Kyle
- Vehicle Year: 2006
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ Aftermarket Locker
- Rank: Extreme Offroader
OK, $900 + shipping. The normal production price of this would be $1000 with the clearcoated powdercoat and the table.
Mike
ETA: Sold - pending funds
Mike
ETA: Sold - pending funds
- bartonmd
- Moderator
- Posts: 4469
- Joined: Wed Sep 09, 2009 9:35 am
- Location: IN, Indianapolis
- Name: Mike
- Vehicle Year: 2007
- Vehicle: Chevrolet TrailBlazer
- DriveTrain: 4WD w/ G80
- Rank: Offroad Rated
71 posts
• Page 4 of 4 • 1, 2, 3, 4