Grimor's Build - 2006 Chevrolet Trailblazer LS

[Grimor]

2006 Chevy Trailblazer LS (Bordeaux Red Metallic)


Drivetrain Specs:
4.2L I6
4.10 front differential
4.10 SS 14-bolt rear

Suspension Modifications:
Mark/Liftmeister 3" Body Lift
Mark/Liftmeister 2-1/2" Suspension lift
Monroe 71341 Sensa-Trac Strut
SkyJacker N8030 Shocks (Monroe 58644 Shocks Sensa-Trac when towing)
Flipped Upper Control Arms
Mark/Liftmeister 6x5 - 6x5.5 adapters

Tires:
Some I got off Regulator that I think came from Hardtrailz
315/70R17 tires = 34.4"

Exterior Modifications:
MDB Fab Custom Front Bumper
MDB Radiator and Oil Skids
Fluidic washer nozzles and larger ID hose
Westin Side Steps
Rolled Front Fender
Curt front hitch (Removed)
Pin stripe removed.

Engine Modifications:
Engine replaced @ 125k miles
K&N HAI w/ Green Filter
External Trans Cooler
Amsoil fluids
MRZ Performance Caps

Interior Modifications:
Cup Holder in Armrest

Recovery Equipment:
3k receiver mounted winch w/ wireless remote
Front Bumper D-Ring Shackles
Trimax TRZ12AL 12" Drop Hitch
Smittybilt 2744 Universal Snatch Block

Electrical Modifications:
Red LED interior lighting
12V Acc port in overhead console
Homelink buttons in overhead console
4 channel wireless remote for Exterior lighting
Light Cannon Roof Lights with clear driving covers
Crappy Truck under tailgate light bars on roof rack

[Grimor]

Figured I'd add some pics from the bumper build. I did not weld this (you can tell because it looks good) My frame and body do not align like they should, so the drivers side wing is actually trimmed about 1-1/2" forward to line up with the fender. The fab guy did a good job of boxing the front near the head lights to make it look good though.





Coming off to prep and paint.


About 3 hours of prep, sanding, grinding and blasting. Self Etching Primer


Flat black paint..


And back on the truck

[Grimor]