So I have been researching lighting, and have found that while HIDs are nice, to do them "right" is expensive.
The problem is cutting off the low beam so you dont blind other drivers
Morimoto mini H1 bi-xenon projector housings are awesome, and a retro fit.
http://www.theretrofitsource.com/produc ... cts_id=227You can save money by using a cheaper ebay hid kit, and wiring.
HIDs arent recommended for high beams, unless you go with a special ballast to handle all the on and off cycles.
So I stumble upon 9012 bulbs for low beams, and 9011 bulbs for high beams. The light output is supposed to be really good, and no other mods needed to run them.
I might just have to try some out, about $20 a bulb at amazon.
(this all started from researching lights for my camaro)