Offroad Trailblazers and Envoys

Roadie's Birthday RTT

Discussion on how to enjoy the outdoors.

by cbbryan » Wed Mar 16, 2011 4:11 pm

I understand the vehicle is designed to withstand rollover(s). But basically nothing should go directly on the roof is self; all weight should be supported by the rail distributing the weight to the edge so that it can be carried through the frame (hence the arc in the factory crossbars). Also, factory cross bars should be replaced with sturdier more rugged hardware to mitigate the potential damage to the vehicles roof and loss of equipment.
User avatar
cbbryan
Trail-Blazer
 
Posts: 270
Joined: Tue Sep 22, 2009 2:26 pm
Location: MS, Amory
Name: Chris
Vehicle Year: 2005
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by Gordinho80 » Wed Mar 16, 2011 4:27 pm

Factory cross bars are garbage. Anyone with a roof rack that uses it should at least upgrade to aluminum tubing from HD/Lowes. The factory rails themselves are not "garbage" but they are nowhere near as sturdy as what Bill put up there now. The factory rails are good for racks, skis, etc... but for something like the RTT, I really like Bill's approach. Not as aesthetically pleasing as the factory rails, but Bill doesn't factor any of that mumbo jumbo in to is mods.
Mario - Build Thread
User avatar
Gordinho80
Lifer
 
Posts: 2787
Joined: Tue Sep 08, 2009 9:27 am
Location: NJ, Jackson
Name: Mario Almeida
Vehicle Year: Other
Vehicle: Other Vehicle
DriveTrain: 4WD

by Trail X » Thu May 05, 2011 11:50 am

Hey Bill, how was your gas mileage affected with the addition of the tent?
8-) Build Thread | ExPo Build | YouTube Videos
Not all who wander are lost. -Tolkien
User avatar
Trail X
Founder
 
Posts: 9935
Joined: Mon Sep 07, 2009 10:22 pm
Location: VA, Roanoke
Name: James Downing
Vehicle Year: 2005
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Expedition Guide

by The Roadie » Thu May 05, 2011 2:12 pm

Around town and the mountains, undetectable change around 11-12. On the one freeway trip I took, I might have lost 1 MPG so I was at 15. But I took off the Surco, and that puppy's turbulence was always present. Not sure at all how much I lost because there's no control experiment.
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

by Philberto » Sun May 08, 2011 6:46 pm

Just realized that I have the equivalent of 4 or 6 SuperStrut bases in my garage... got them when I was working at the dealer, I think they came off a Tahoe or a Hummer or something... :excited:
My Build Thread | 2006 Trailblazer LS Desert Camping Edition **SOLD**
2013 Nissan Xterra S "ReXterra"
User avatar
Philberto
Lifer
 
Posts: 2046
Joined: Fri Sep 11, 2009 5:30 pm
Location: CA, Oxnard
Name: Philip Cruz
Vehicle Year: Other
Vehicle: Other Vehicle
DriveTrain: 4WD
Rank: Offroad Rated

by NC_IslandRunner » Thu Aug 23, 2012 5:31 pm

Bill, where did you get the neoprene? I looked all over Lowes today and couldn't find anything close.
IF THE FISH STOP BITING... HUNT FOR SHELLS!!!
User avatar
NC_IslandRunner
Moderator
 
Posts: 3022
Joined: Fri Dec 03, 2010 4:49 pm
Location: NC, Sanford
Name: Rory
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ G80
Rank: Offroad Rated

by The Roadie » Thu Aug 23, 2012 8:43 pm

My daughter used to work at an industrial supply house. She shares my love of dumpster diving.

Old inner tubes should work. Otherwise hit up Granger or McMaster-Carr.

Or slice up an old wetsuit
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

by gps4 » Wed Jun 19, 2013 2:10 pm

did you use the factory nuts and bolts that held the factory rails to mount the superstrut rails?
gps4
Newbie
 
Posts: 2
Joined: Mon Oct 17, 2011 9:31 am
Name: phil
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by The Roadie » Thu Jun 20, 2013 2:01 am

I used the factory metric screws with added stainless washers to hold the rails to the factory nutserts that were in the roof.
User avatar
The Roadie
Founder
 
Posts: 5011
Joined: Mon Sep 07, 2009 11:29 pm
Location: CA, Vista, San Diego County
Name: Bill Carton
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80
Rank: Expedition Guide

Previous

Return to Camping / Survival

cron