Offroad Trailblazers and Envoys

What did you do to your GMT today?

Trailblazer and Envoy related, but not off-road related...

by Sugar16 » Thu Mar 28, 2019 6:39 am

Did a few things yesterday, changed oil in the engine, mounted up a second battery box, fuse panel, and mocked up 2 pod gauge mount. I've also been working on a switch panel mount that I put on, has a couple fitment issues but is a work in progress. I'm hoping to start wiring up some things this week and then this weekend building some rock sliders and adding some tubing to my front bumper.
Attachments
Switch Box.jpg
Gauge 2.jpg
Gauge.jpg
Battery Box.jpg
User avatar
Sugar16
Off-Roader
 
Posts: 110
Joined: Mon Sep 24, 2012 6:06 pm
Location: OH, Canton
Name: Jonathan
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD

by Trail X » Sat Mar 30, 2019 2:08 pm

Wow, not bad! Keep it up Johnathan!
8-) Build Thread | ExPo Build | YouTube Videos
Not all who wander are lost. -Tolkien
User avatar
Trail X
Founder
 
Posts: 9917
Joined: Mon Sep 07, 2009 10:22 pm
Location: VA, Roanoke
Name: James Downing
Vehicle Year: 2005
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Aftermarket Locker
Rank: Expedition Guide

by 06denaliman » Sun Apr 14, 2019 3:43 pm

Did this yesterday

Image

And my mirrors are 3m satin black metallic.

Image

Image


Sent from my iPhone using Tapatalk
06denaliman
Cruiser
 
Posts: 47
Joined: Wed Jan 30, 2019 7:04 pm
Name: Justin
Vehicle Year: 2006
Vehicle: GMC Envoy
DriveTrain: 4WD w/ G80

by Flyingfischer5 » Mon Apr 15, 2019 8:09 pm

Finally got to putting Moog 81069 in the rear. I picked up about 2.5" in the rear and now sits at 39" on both front and rear fenders on flat ground! The stock shocks were sagging with the rear tire and RTT and helped with sway a bunch. Now I have only a inch of clearance on my garage door. Hahaha

Image

Sent from my MHA-L29 using Tapatalk
User avatar
Flyingfischer5
Off-Roader
 
Posts: 149
Joined: Sun Feb 21, 2010 9:43 pm
Location: Spokane, WA
Name: Craig
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by Sugar16 » Thu Apr 18, 2019 6:31 am

Finished up my gauge pod's and put it in place to see how it looks, I need to run the wiring for the gauges but it turned out much better than I had expected.
Attachments
Gauge Pod 2.jpg
Gauge Pod 1.jpg
User avatar
Sugar16
Off-Roader
 
Posts: 110
Joined: Mon Sep 24, 2012 6:06 pm
Location: OH, Canton
Name: Jonathan
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD

by Sugar16 » Fri Apr 19, 2019 8:14 pm

Wired up my gauges today and also replaced my blower motor resistor. While installing the temp sender I found that my tie-rod's need replaced. Would explain the shimmy that I have been noticing. So while I swap out my front diff tomorrow I guess new tie-rods are going to be getting put on.
User avatar
Sugar16
Off-Roader
 
Posts: 110
Joined: Mon Sep 24, 2012 6:06 pm
Location: OH, Canton
Name: Jonathan
Vehicle Year: 2004
Vehicle: GMC Envoy
DriveTrain: 4WD

Previous

Return to Truck Discussion