Offroad Trailblazers and Envoys

Adding tow hooks with body lift

If its been completed, and doesn't fit into another category, stick it here.
Forum rules
Threads must fully document the modification with pictures and verbiage in the first post.
Threads that do not meet this criteria may be moved or deleted.

by Chango » Sat Aug 09, 2014 11:57 am

This is how I added tow hooks until I can get skids/bumper made. Prolly not ideal but it'll work for me.

Went to junk yard and picked up a pair of hooks from a 99ish blazer.

Drilled out the front hole to 1/2" so my existing bumper bolt would go through. And cut 1/4" off the back of the hook to fit the frame. Took out the bumper bolt and ground the frame flat. Then just bolted the hook to the frame using the bumper bolt and stitched the back side.

I will post more pics when I find my camera ...:?:


User avatar
Posts: 184
Joined: Thu Oct 24, 2013 12:56 pm
Location: S.E. Michigan
Name: Chris
Vehicle Year: 2007
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Limited Slip

Return to Completed Modifications