Offroad Trailblazers and Envoys

no 4x4, no lights, no nothin

Something not working right?

by tarsh » Wed Mar 05, 2014 8:08 pm

Same problem as rosier1 had except I have the lights that turn on with ignition, after that there's nothing. Engaged the 4x4 goin 10mph or so then felt a slight jerk and heard a continuous clicking from what sounded like the t-case. Tryed to put it back in 2hi and nothing and the clicking went away.when I got home I Tryed the neutral switch,put it in reverse,drive nothing. It said it was in 4hi but it was not. Your brains are better than nine at this So any help would be great. I have yet to check fuses and I don't have a service 4x4 light.
Thanks
Take the path less traveled
My Build Thread
User avatar
tarsh
Trail-Blazer
 
Posts: 483
Joined: Sun Jul 21, 2013 12:16 am
Location: MI, Holly
Name: Nathan Schroeder
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Offroad Rated

by Edubarajas » Wed Mar 05, 2014 9:44 pm

Have you pulled out your actuator that engages you 4X4
User avatar
Edubarajas
Cruiser
 
Posts: 41
Joined: Mon Oct 07, 2013 6:50 pm
Location: WA, Spokane
Name: Eddie Barajas
Vehicle Year: 2002
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by tarsh » Wed Mar 05, 2014 9:56 pm

So mad right now! I just went out and Tryed it. It works. I was so flippen madd! Must be a TB thing :work: :wallbash: :oops: :facepalm:
Take the path less traveled
My Build Thread
User avatar
tarsh
Trail-Blazer
 
Posts: 483
Joined: Sun Jul 21, 2013 12:16 am
Location: MI, Holly
Name: Nathan Schroeder
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Offroad Rated

by TBYODA » Wed Mar 05, 2014 10:42 pm

Could be the switch try moving it thought the 2hi <--> 4lo about 100 times with the TB off.
2008 TB Radflo coil overs, Z71 rear springs, 2" spacer, skyjacker N8030 shocks, LT285/75R16E Goodyear MTR

My Build ----- MY Youtube Channel
User avatar
TBYODA
Moderator
 
Posts: 1762
Joined: Mon Apr 01, 2013 9:07 pm
Location: NY, Rochester
Name: Robert Sengillo
Vehicle Year: 2008
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD w/ Limited Slip
Rank: Offroad Rated

by Edubarajas » Thu Mar 06, 2014 12:03 am

That's happened to me I just turn the ignition off then on and it works. Or sometimes it stays on neutral it happens
User avatar
Edubarajas
Cruiser
 
Posts: 41
Joined: Mon Oct 07, 2013 6:50 pm
Location: WA, Spokane
Name: Eddie Barajas
Vehicle Year: 2002
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD

by tarsh » Thu Mar 06, 2014 12:07 am

Idk. I'm just glad it fixed it's self . Not sure what the clicking was but it didn't sound real good
Take the path less traveled
My Build Thread
User avatar
tarsh
Trail-Blazer
 
Posts: 483
Joined: Sun Jul 21, 2013 12:16 am
Location: MI, Holly
Name: Nathan Schroeder
Vehicle Year: 2004
Vehicle: Chevrolet TrailBlazer
DriveTrain: 4WD
Rank: Offroad Rated


Return to Troubleshooting