by Feets001 » Tue Sep 08, 2015 6:09 pm
I am slowly procuring the parts to rebuild my suspension. I have been lurks my around here about a year, or so. I have Mark's three inch lift kit, Rock Auto's control arms, outer tie rods, 81114 springs, and, ball joints. Still need the struts, shocks, and rear springs. The truck is an 03 with 157.000 minutes led. However hopeflhthe inner tie rods , and half shalf's are okey. I guess I'm a dummy, but I struggle with the washers under the front lift puck, and the shimming when flipping the upper control arms. Can I not just put it all together and get it aligned and ride?